ВЫКЛЮЧАТЕЛЬ СВЕТА ЗАДНЕГО ХОДА > УСТАНОВКА |
1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY |
Using SST, install the back-up light switch and gasket to the transaxle case.
Connect the back-up light switch connector.
2. INSTALL NO. 1 AIR TUBE (for 1ND-TV) |
Install the No. 1 air tube with the 3 bolts, and tighten the 2 hose clamps.
3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for 1ND-TV) |
Install the air cleaner case sub-assembly with the 3 bolts.
4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 1ND-TV) |
Install the air cleaner cap sub-assembly, and connect the 2 clamps and band.
Connect the No. 2 ventilation hose.
Connect the mass air flow meter connector.
5. INSTALL BATTERY TRAY |
6. INSTALL BATTERY (for 1ND-TV) |
Install the battery and battery tray.
Install the battery clamp with the bolt and nut.
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |